This item is not part of our current product range.
Active PA-Speakers • Fullrange speaker • Design: Multifunctional cabinet • Internal cross over: Yes • Components: 12" LF- / 1" HF-driver • directional characteristic: 90° x 40° • Power amp output: 225 + 75 W rms • Frequency range: 50 Hz - 20 kHz • Max. SPL ( 1 W/1 m): 121 dB • Special Features: Incl. 2 band EQ • Connections: XLR in/out; jack • Pole flange: Yes • Flyability: No • Enclosure: Black Polypropylene • Dimensions (WxHxD): 652 x 406 x 351 mm • Weight: 23,0 kg • Features:
Active 2-way full range-system
Components: 12“ woofer and 1“ HF-driver in a multifunctional cabinet
Incl. 2-band EQ
Horizontal/vertical coverage 90° x 40°
Frequency range 50 Hz to 20 kHz (+/-10 dB)
Black polypropylene cabinet
microphone/line XLR in
XLR out and additional 1/4" Jack input
35 mm stand adaptor
Dimensions 652 x 406 x 351 mm,
The MSR400 is a bi-amplified 2-way system, featuring 400 watts maximum burst. The speaker accepts nominal input levels ranging from –36 dB to +4 dB, meaning that you can directly connect any source from microphones to professional line-level gear. Three parallel-connected connectors are provided – two balanced XLR-type connectors and one balanced phone jack – that can be used as either inputs or parallel outputs. The MSR400 also features an input level control for matching with the source signal. Low and high EQ controls can be used to adjust the respective bands over a plus-or-minus 3dB range. Speaker placement is as much a performance issue as it is a convenience and aesthetic issue. Proper placement will give you optimum sound as well as coverage while being as unobtrusive as possible. Of course, the more options you have the better. The MSR400 can be stacked or pole-mounted (there’s even a pole-mount hole provided on the companion MSR800W Powered Woofer). And it’s flyable so you can benefit from the unrivalled coverage and positioning precision that only ceiling suspension can provide. MP-Rating: The MSR 400-Tops has two separate, internal, active amplifiers that can deliver up to 400 watts peak power. A gain-switch makes it possible to reduce the input down to –36 dBu. All this leads to the conclusion that the Yamaha MSR 400 is not only usable as a System speaker but will also perform fine as a stand alone speaker. A 2-Band-EQ and an additional input jack increase the flexibility. 5 Stars. Legend: 1 Star – still room for improvement! 2 Stars – overall impression satisfactory! 3 Stars – good price/performance value! 4 Stars – very recommendable! 5 Stars – highly recommendable! 6 Stars – unbeatable top product!
Alternative products from our current product range: