This item is not part of our current product range.
Audio interface • Subcategory: USB Interface • PC Connection: USB 2.0 • Design: Desktop • Analogue In/Out: 2/4 In / 4/2 Out • Mic Inputs: 2 • Digital In/Out: SPDIF coax / optical • Monitor Mixing: Hardware Monitoring DSP controlled • Sampling Rate: 192 kHz • Resolution: 24-Bits • Bus Powered: Yes • Special Features: DSP Monitoring with effects • Accessories: USB cable, Cubase LE •
Switchable 6-input/4-output or 4-input/6-output 24-bit 192kHz USB 2.0 audio interface with digital I/O • The 6-input/4-outout or 4-input/6-output 24-bit 192kHz Tascam US-366 USB 2.0 audio interface features two XLR/TRS balanced microphone/line level inputs with HDDA microphone preamps and switchable +48V phantom power for condenser microphones. One TRS input is switchable to Hi-Z for direct input of electric guitars, basses and other instruments. Two Line RCA inputs. Two balanced TRS line outputs. The US-366 interface is switchable between 6-input/4-output or 4-input/6-output depending on the setting of Line connectors 3 and 4. Stereo digital input selectable coaxial or optical at sampling rates up to 192 kHz and one stereo digital output with coaxial and optical simultaneously. On-board digital mixer with selectable Multi-track tacking mode or Stereo mix mode. Built-in Compressor and EQ insert effects and Reverb send effects. Loop-back function allows sounds from the computer to be mixed and sent back to the computer. Low latency monitoring. USB 2.0 powered, no AC adapter necessary. Bundled with Steinberg Cubase LE6 DAW software.
Switchable 6-input/4-output or 4-input/6-output 24-bit 192kHz USB 2.0 audio interface with digital I/O Two XLR/TRS balanced microphone / line level inputs One TRS input switchable to high impedance for guitars, basses and other instruments Switchable +48V phantom power for condenser microphones Two RCA line connectors switchable input/output Six audio inputs and four audio outputs or four inputs and six outputs, depending on the setting of Line connectors 3 and 4 Stereo digital input selectable coaxial or optical, up to 192 kHz Stereo digital output coaxial and optical simultaneously Loop-back function allows sounds from the computer to be mixed and sent back to the computer On-board digital mixer with selectable Multi-track tracking mode or Stereo mix mode On-board Insert Effects: Compressor, EQ On-board Send Effects:Reverb Low-latency monitoring 1/4-inch Headphones output with level control Remote connector for optional RC-3F foot switch USB 2.0 bus-powered, no AC adapter required Steinberg Cubase LE6 DAW software included
Alternative products from our current product range: