This item is not part of our current product range.
Audio interface • Subcategory: USB Interface • PC Connection: USB 2.0 • Design: Desktop • Analogue In/Out: 2 In / 2 Out • Mic Inputs: 2 • Monitor Mixing: Hardware Monitoring DSP controlled • Sampling Rate: 96 kHz • Bit Rate: 24-Bits • Bus Powered: Yes • Special Features: DSP Monitoring with effects • Accessories: USB cable, Cubase LE •
2-input / 2-output 24-bit 96kHz USB 2.0 audio interface with DSP monitoring and effects • The 2-input x 2-output 24-bit 96kHz Tascam US-322 USB 2.0 audio interface features one Microphone XLR/Line-Guitar TRS input, one Microphone XLR/Line TRS input with HDDA microphone preamps and +48V phantom power, plus two balanced TRS Line Level and two Line Level RCA outputs in parallel. One TRS input is switchable to high impedance for use with electric guitars, basses, and other instruments. 1/4-inch TRS headphone output with level control. On-board digital mixer with selectable Multi-track tracking mode or Stereo mixing mode, Compressor and EQ input effects, and Reverb send effect. A Loop-back function allows sounds from the computer to be mixed and sent back to the computer. USB 2.0 bus-powered. Bundled with Steinberg Cubase LE6 DAW software.
2-input / 2-output 24-bit 96kHz USB 2.0 audio interface Two balanced XLR microphone/TRS line inputs. Input channel 1/L can be switched to Hi-Z direct guitar and instrument input +48V phantom power for condenser microphones TRS balanced Line Outputs and RCA line outputs with the same signal 1/4-inch TRS headphone output with level control On-board digital mixer with selectable Multi-track mode or Stereo mix mode Insert Effects: Compressor and EQ Send Effects:Reverb Low latency monitoring USB 2.0 bus-powered Cubase LE6 DAW software included
Alternative products from our current product range: