0
Our Music Store Service Contact
Headphone Amplifier SPL Phonitor 2 Black
Headphone Amplifier SPL Phonitor 2 BlackHeadphone Amplifier SPL Phonitor 2 Black

SPL Phonitor 2 Black

(1 Rating)
  • For all headphones with impedances from 10 Ohm (balanced KH from 40 Ohm)
  • Phonitor Matrix to simulate a monitor stereo image when using headphones
  • Controls: Volume control with any remote control
  • Number of channels: 1
  • Frequency Response: 4 Hz to 480 kHz (-3 dB)
  • Dynamic Range: KH 133,62 dB / Line 134,37 dB
  • THD: KH 0.00091 % / Line output 0.00085
  • Output Power: 560 mW (1 kHz/40 Ohm)
  • Level adjustment: Switchable (consumer to professional level, 1:1, +6 dB, +12 dB)
  • Headphone Inputs: 1 x 6.3 mm stereo jack
  • Inputs: 2 x XLR (L/R), 1 x RCA (L/R)
  • Outputs: 1 x XLR (L/R)
  • Dimensions W/H/D: 278 x 100 x 330 mm
  • Weight: 4,3 kg
  • Country of Origin: Germany
 more
 less

SPL Phonitor 2 Black · Headphone Amplifier

Our absolute secret tip for listening, belongs in every studio.
The reference monitor controller. The Stereobus of an official console. Details, punch, precision, panorama.


The functional center of gravity of the phonitor 2 still lies in the area of ​​the headphone amplifier - can be easily recognized by the complex simulation of the loudspeaker reproduction for the headphone signals. However, since the 120-volt amplifier basically supports everything for the pre-amplification, management and volume control of line signals, the controlled line-level signal at the back-end output is now available as well as the headphone output signal.
On the output side, active loudspeakers or power amplifiers can be connected in addition to the direct headphone connection. If there is a need to control more than one stereo loudspeaker set, a passive distribution system is recommended. Important to know: all control functions can be used via both outputs for headphones and loudspeakers. Of course, the simulation of the loudspeaker reproduction does not make sense in the case of direct loudspeaker reproduction, but, for example, if an owner of electrostatic headphones concludes his amplifier there, the simulation can also be used with these systems. Likewise, all monitoring functions (phase reversal, solo, mono, mute) can be heard on both outputs, so that the professional use as monitor controller for up to three sources is also supported.
 more
 less

Ratings

5 stars
(1)
4 stars
(0)
3 stars
(0)
2 stars
(0)
1 star
(0)
Average customer rating:
(1 Rating)
5.0 out of 5 stars
This item was given an average rating of 5.0 out of 5 stars. No review about this product has been written yet. 1 rating exist without a text or the review is written in another language.
 more
 less
incl. VAT, free delivery
In stock
Available for immediate delivery
Add to wish list
10073637
Item number:

04/2014
Available since:

04260149321305
GTIN:

Print view
Advice & Support
Dept. Recording/Keyboards
Jonas Ahrens
Dept. Recording/Keyboards
Tel.: +49 5451 909-190
recording@musik-produktiv.de

Order Hotline
+49 5451 909-189
info@musik-produktiv.co.uk

Accessories

  • Roland Rubix22
    Roland Rubix22, Audio Interface
    1 666 kr
  • Roland Rubix24
    Roland Rubix24, Audio Interface
    1 990 kr
  • Roland Rubix44
    Roland Rubix44, Audio Interface
    2 216 kr
  • Roland GO:LIVECAST
    Roland GO:LIVECAST, Audio Interface
    2 463 kr
  • Stand Art Pop Filter with Rail
    Stand Art Pop Filter with Rail, Mic Accessories
    171 kr

Customers were also interested in: