RockBoard RPA 100 Power Attenuator 100 W
Product information "RockBoard RPA 100 Power Attenuator 100 W"
With the RockBoard RPA100 Power Attenuator you can set your amp to your favourite sound — including high-gain and power-amp distortion — and then reduce the speaker volume to a level acceptable for stage or rehearsal room without changing the amp's tone. Tube amps in particular benefit enormously from this approach. The RockBoard RPA 100 Power Attenuator can tame amps with an output of up to 100 watts.
Thanks to the selection of 4, 8 and 16 ohm outputs your amp always sees the correct speaker impedance, regardless of which type of speakers are connected to the attenuator. You can even run the amp without a speaker and monitor the signal via headphones.
Additionally, the RPA 100 Power Attenuator offers the option to route the signal from your amp's power amp via DI OUT or LINE OUT to a mixer or audio interface, or to practise with the amp's original sound via the headphone output.
- Color/ Finish: Black
- Connections: 1 x 3.5 mm AUX input, 2 x 6.3 mm speaker outputs (parallel), 1 x 6.3 mm line level output, 1 x 3.5 mm headphone output, XLR-DI output, 3 x separate inputs for 4, 8 or 16 Ohm
- Controls: Speaker Level, Line Out Level
- Design: Desktop
- Impedance: 4/8/16 ohms
- Switches: Cab Sim bypass
- Type: Attenuator
- suitable for: Amps up to 100 watts output power
