RockBoard MOD 1 V2All in One TRS & XLR IEC & Barrel Patchbay
session Walldorf:
available locally at short notice
session Frankfurt:
currently not available at local store
Musik Produktiv Ibbenbüren:
currently not available at local store
Product information "RockBoard MOD 1 V2All in One TRS & XLR IEC & Barrel Patchbay"
The revised RockBoard® MODs V2 are simple all-in-one patchbays for the RockBoard Pedalboard Series with a new, updated design and a compact housing. Suitable for all new RockBoards® (except the DUO series) with a MOD slot, they provide a convenient patchbay with various cable connections to cover a wide range of needs. With the RockBoard® MODs you can permanently wire your pedals under the board and organise all connections to and from your effects setup in one handy module. The RockBoard® MODs provide a central access point from the instrument to the amp as well as a practical and easy power pass-through for the board via an IEC and a 2.1 x 5.5 mm barrel through power connection. The RockBoard® MOD 1 V2 is a pass-through box specifically designed for guitarists and bassists. You can use the MOD 1 V2 to place several pedals of your setup in the front end and the amp's effects loop (4-cable method) or use the four TRS connectors as the central input and output of the board. The XLR through connection can be used as a signal output from the pedalboard to the mixing desk or PA. RockBoard MOD 1 V2All in One TRS & XLR IEC & Barrel Patchbay:
- All-in-one patchbay for pedalboards
- fits MOD slots in RockBoard pedalboards
- compatible with a wide range of other pedalboards
- functions as a central access point to your effects setup
- establishes neat cable runs to and from the pedalboard
- removable front plate for mounting on or under pedalboards
- 5 x 6.3 mm TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2.1 x 5.5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the rear side
- Dimensions with front plate (W x D x H) 175 x 85 x 47 mm
- Dimensions without front plate (W x D x H) 160 x 85 x 33 mm
- Weight 450 g
- incl. mounting screws, jam nuts and Torx key
- Without pedalboard (example image)
- Subcategory: Other accessories
