Neutrik NC3MXX-EMC
Product information "Neutrik NC3MXX-EMC"
The EMC-XLR series is a specially designed version of the XX series that provides increased protection against high-frequency interference (radio, mobile phones, etc.) for critical applications such as live performances or recordings. The design guarantees complete RF shielding from the cable to the plug housing by means of a 360° shielding contact. The capacitor acts as a high-pass filter with a cut-off frequency of 10 MHz.
A ferrite bead with 24 ohms at 1 MHz between pin 1 and the cable shield ensures the suppression of electromagnetic interference.
Features & Benefits
- 3-pin male and female XLR cable connector with integrated capacitive shield-to-housing connection
- Low-inductance connection from cable shield to housing via large-area, circular capacitance
- Suppression of EMI through ferrite bead between pin 1 and cable shield
- No ground loops, as there is no connection between the low-frequency shield and earth
- Robust, durable die-cast zinc housing
- Cable strain relief clamps for a secure hold on every cable
- Kink protection with rubber termination protects the cable at the plug end
- Marked with the unique hologram - guarantees an original and genuine Neutrik product
- Capacity between contacts: ≤ 4 pF
- Connection typ: solder contacts
- Contact resistance: ≤ 3 mOhm
- Diameter cable management: 3,5 - 8,0 mm
- Dielectric strength: 1,5 kVdc
- Enclosure: Die-cast zinc
- Housing Colour: Black
- Kink protection: Polyurethane
- Plug-in power: ≤ 20 N
- Plug type: Male
- Rated current per contact: 5 A
- Withdrawal: ≤ 20 N
- Low-inductance connection from cable shield to housing via large-area, circular capacitance
- No ground loops, since there is no connection between the low-frequency screen and grounding
- Suppression of EMI by ferrite bead between pin 1 and cable shield
- contacts: Gold plated
- insulation resistance: > 10 GOhm (initial)
- lock: Die-cast zinc (ZnAI4Cu1)
- nominal voltage: < 50 V
- number of pins: 3
- strain relief: yes