IK Multimedia iLoud MTM MKII - Pair
Product information "IK Multimedia iLoud MTM MKII - Pair"
Although the outward appearance may look familiar at first glance, numerous improvements are hiding "under the hood": iLoud MTM MKII once again sets a new standard.
- Improved speaker drivers (lighter and stiffer diaphragms)
- Improved off-axis response
- Improved power efficiency and SPL (112.5 dB instead of 110.5 dB)
- Higher onboard processing power, improved DSP (96 kHz instead of 48 kHz)
- Improved room correction
- iLoud MTM MKII is compatible with X-Monitor software
Improved speaker drivers
Redesigned custom mid-woofers not only provide more volume and definition in the low end, but also improve clarity
and articulation. Thanks to the lighter and stiffer moving mass, the MKII mid-woofers reproduce even the smallest detail in the midrange
and enable a more revealing and critical listening experience, ultimately leading to a faster and more accurate workflow in the mix.
Improved off-axis and in-room dispersion
Controlled vertical dispersion was one of the key features of the original iLoud MTM design.
This has been retained in the MKII to minimise unwanted interactions that can occur with untreated ceilings or desks.
However, the MKII's horizontal dispersion has been significantly improved, resulting in a wider sweet spot and a smoother in-room frequency response.
Improved power efficiency and SPL
The speaker's entire power management has been improved. As a result, iLoud MTM MKII
is able to deliver a higher maximum sound pressure level compared with its predecessor.
Higher onboard processing power, improved DSP
The onboard processing power has almost doubled compared with the original iLoud MTM.
The speaker now operates at 96 kHz, so all DSP processing works with higher precision and provides more transparency and resolution; the ARC
correction is now directly derived from the Precision series and supports virtual X-Monitor voicing.
Improved room correction
A new version of ARC technology is integrated into iLoud MTM MKII, offering significant improvements over the previous version.
With the same technology and correction algorithms used in the iLoud Precision series, the MTM MKII is able
to guarantee unmatched definition and reproducibility in virtually any environment.
iLoud MTM MKII is now compatible with X-Monitor
X-Monitor is advanced control software for iLoud family speakers that gives the user full control over all speaker functions via a clear and intuitive user interface.
- Type: 2-way / 3-driver bi-amped, digitally controlled studio monitor
- LF drivers: 2 x 3.5" composite cellulose-fibre mid-woofers, custom-made
- HF driver: 1" low-distortion silk-dome tweeter with rear chambers
- Acoustic design: DSP-tuned bass reflex
- Number of amplifiers per speaker: 2
- Amplifier type: high-efficiency Class-D
- Total power: 100 W RMS
- LF power: 70 W RMS
- HF power: 30 W RMS
- Crossover type: digital, linear-phase
- Crossover frequency: 2.8 kHz
- Frequency response: 48 Hz to 28 kHz ±2 dB, 36 Hz to 32 kHz @ -10 dB
- Phase response: system remains coherent within +/- 15° from 200 Hz to 20 kHz
- Sensitivity at +4 dBu: -6 dBu signal produces 94 dB SPL @ 1 m
- Sensitivity at -10 dBV: -17 dBu signal produces 94 dB SPL at 1 m
- Continuous maximum sound pressure level: 97 dB (free field, one speaker, 1 m distance, ANSI-2034 weighted pink noise)
- Peak SPL: 110.5 dB (free field, one speaker, 1 m distance, ANSI-2034 weighted pink noise)
- Peak SPL: 112.5 dB (half-space, one speaker, 1 m distance, ANSI-2034 weighted pink noise)
- Placement settings: manual switches for LF extension, LF trim, HF trim, desk position
- LF extension switch: sets the -3 dB point of the frequency response to 40, 50, 60 or 80 Hz (LFE)
- LF switch: low shelf, +2 dB or -3 dB below 100 Hz
- HF switch: high-frequency band, +2 dB or -3 dB above 8 kHz
- Desk switch: -4 dB at 160 Hz and +1 dB at 1.8 kHz
- Calibration: fully automatic, integrated digital calibration
- Full DSP control
- X-MONITOR macOS and Windows control software
- Total latency (TOF): 2.44 ms
- Connections: 1 x combo XLR/TRS balanced input, 1 x 1/8" TS ARC microphone input, 1 x USB Type-B, AC
- POWER socket
- Power requirements: 90 to 240 V AC, auto-ranging, 50 or 60 Hz, 120 W maximum consumption
- Dimensions: 264 mm x 160 mm x 130 mm
- Weight: 2.5 kg including tilt foot
- Amplifier class: Class D
- Amplifier output per channel: 70W RMS (LF) +30W RMS (HF)
- Housing Colour: Black
- Price & packaging unit: 1 Pair
- Subcategory: Nearfield monitor
- Technology: 2-Way active
The company IK Multimedia is an innovative firm specialising in the development and production of music software and hardware. The company was founded in 1996 in Modena, Italy, where its headquarters are still located today.
The philosophy of IK Multimedia has always been: Musicians First!
All products and developments therefore must not simply work, but inspire musicians and producers when making music and at the same time encourage new creativity. IK Multimedia doesn't just meet expectations, it creates entirely new ones!
IK Multimedia offers a wide product range for musicians and producers. These include digital audio workstations (DAWs), virtual instruments, effect plug-ins but also synthesizers and MIDI controllers and much more.
The company has made a name for itself with groundbreaking products like AmpliTube, SampleTank as well as the versatile range of the popular iRig series. Very recently IK Multimedia has been shaking up the electric guitar market with products from the TONEX series. With the TONEX solution you can capture, store, tweak or share your amp sound. Using state-of-the-art artificial intelligence your amp or pedal sound (or both!) is captured and presented to you in digital form in the TONEX software. Your amp remains exactly as dynamic as you know it and the playing feel stays perfectly preserved!
Customers were also interested in:
