Phonic i7100

Phonic i7100, Feedback Killer

Item number: 10063249
This item is not part of our current product range.
Feedback Killer • Feedback filter per channel: up to 24 per channel • Number of channels: 2 • Displays: LED segment meter for input signal and LED’s for set filter • Inputs and Outputs: XLR and ¼" jack • Bypass: Yes • Dimensions W/H/D: 19"/1U • 24 filters remove feedback • The Phonic i7100 Feedback Silencer provides 2 channels of 12 notch filters per channel to remove feedback from audio signals. Despite the complexity of the i7100's technology, it is easy to operate. Each filter can be set to operate in one of three modes: Single-Shot, Auto, and Parametric. In the Single-Shot mode, each filter is automatically assigned and locked to a feedback frequency until it is manually reset. In the Auto Mode, the filters are dynamically assigned and reassigned to match varying feedback frequencies. In Parametric mode, the filters can be manually set to function as a fully parametric EQ, capable of fine adjustments of center frequencies, bandwidth, and gain.
  • 24 programmable parametric filters (2 x 12 filters) that can be manually set
  • Single-Shot Mode automatically seeks and destroys feedback and locks the filters until manually reset
  • Auto Mode monitors the mix and automatically resets the filters
  • Manual Mode provides each channel with up to 12 fully parametric filters, including frequency, bandwidth, and gain
  • Single-Shot, Auto, and Parametric filters can be assigned to each individual filter
  • 24-bit A/D and D/A converters with 256/512 times over sampling
  • Internal 32-bit processor with 48 kHz sampling rate
  • Automatically searches and removes feedback in up to 12 frequencies per channel
  • Balanced XLR and 1/4-inch TRS inputs and outputs
  • 20 user-definable presets
  • 20 factory presets
  • 10-segment LED meter per channel display output levels
  • Immediate display and parameter tuning
  • Recent changes are automatically stored and kept, even after power down
  • Key-locking for security against accidental alteration of settings

Alternative products from our current product range: