Line 6 DT25 HD

Line 6 DT25 HD, Guitar Amp Head

Item number: 10054289
This item is not part of our current product range.
Guitar Amp Head • Technology: Hybrid • Power: 25 W • Channels: 2 • EQ: 2x bass, mid's, treble, presence • Pre Amp Valves: 1x 12AX7 • Power Amp Valves: 2x EL84 • Effects: Effects Processer • Impedance: 4/8/16 ohms • 25-Watt Guitar Amplifier Head with Dynamic Analog Circuitry and HD Modelling • Simple and straightforward 2-channel design • Each channel has Drive, Bass, Mid, Treble, Presence, Reverb, and Channel Volume controls • Master volume control • Reconfigurable analog components: Class A/Class AB; Pentode/Triode • Complete, 1-touch analog reconfiguration via Channel select switch • Low-power mode • L6 LINK in/thru connection for POD HD integration • Serial effect loop with level control • Footswitch jack for channel switching • The Line 6 DT25 HD Guitar Amp Head is an guitar amp that configures and adapts its analog components and digital modelling in real time. Select a model, the DT50 Amp instantly reconfigures the tube power section to provide the optimal tone. The digital section monitors the tube power section and can adjust the DSP in real-time. At high volumes, the tubes provide more distortion. At low volumes, the modelling delivers more of the colouration. The digital section now “talks” to the analog section, and vice versa. The idea behind the DT25 is that all great guitar tones are based on one of four basic voicings: American clean, English chime, English crunch, and Modern high-gain. The DT25 uses the same ultra-high-resolution HD modelling found in their POD HD effects units to emulate these basic voices, and that's where the modelling ends. The DT25 uses one 12AX7 preamp tubes and two EL84 power amp tubes. Front panel switches flip the power amp stage from Class A to Class A/B and from triode to pentode mode. This dynamic analog circuitry lets you completely customize the way the DT25 responds to your playing style. Hook up a POD HD via the L6 LINK connection, and the DT25 will automatically reconfigure itself to match the tone you call up. The L6 LINK also lets you daisy chain multiple DT25 series amplifiers via standard XLR cables. The DT25 is perfect for recording and low-volume rehearsal. Just dial in the low-volume control, and you get the tone you want at the level you need. If you're recording, you can also go directly out of the DT50 via XLR.
  • Tube section designed by tube amplifier guru Reinhold Bogner
  • 1 x 12AX7 preamp and 2 x EL84 power tubes
  • 2-channel design reconfigurable per channel
  • Selectable operating class: Class-AB 25 Watts Fixed Bias or Class-A 10 Watts Cathode Biased
  • Selectable power tube mode: Pentode or Triode
  • Four unique Voicings, negative feedback loop topologies paired with HD preamp and tone stack modelling: (1) Classic American Clean/Tight NFL (2) British Crunch/Medium NFL (3) Class A Chime/Zero NFL, (4) Modern, High-Gain/Resonant NFL
  • HD amp modelling Voicing preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog circuitry
  • Both channels have Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume. Rest of front panel: Channel switch; Voicing switch; Pentode/Triode switch; Class A/Class AB switch; Master volume; Power; Standby
  • Modelled spring reverb with individual level control per channel
  • Back-lit front panel
  • MIDI I/O
  • Series effects loop
  • Cabinet simulated direct output
  • Low Volume Mode provides cranked tube tone at quiet volume
  • Speaker jack-sensing provides relay driven output transformer protection circuit
  • L6 LINK connects the DT25 amp to a POD HD multi-effect for additional effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) – all controlled by any L6 LINK equipped POD HD multi-effect
  • Connect a footswitch for channel-switching or reverb control. (Footswitch not included)
Line 6