HomeStudio and RecordingStudio MonitorsActive SubwooferAdam AudioSub12

Adam Audio Sub12

Components: 1 x 12"
Power amp output: 200 W
Amplifier class: PWM
Crossover: adjustable, 50 - 150 Hz
Maximum Sound Pressure: 115 dB
Frequency Response (+/-3 dB): 22 Hz - 150 Hz
Analogue Inputs: XLR-L/R, RCA-L/R
Analogue Outputs: XLR-L/R, RCA-L/R, Sub-Out (XLR)
Other in/outputs: None
Controls: Gain Control, Crossover Control, Sat-Filter (85 Hz/flat), Phase Switch, Standby Mode, Power on/off
Colour / Finish: Black
Weight: 26,0 kg
Dimensions W/H/D: 600 x 360 x 450 mm
Including: Subwoofer, Power Cord

Adam Audio Sub12 · Active Subwoofer

Features:

Type: Subwoofer, bass reflex
Frequency range: 25 Hz - 150 Hz
Output power : 400 watts
Max. SPL (1W / 1 m): 11504 dB
Nominal impedance : 8 ohms
Components: 12“ woofer
Dimensions: 360 x 600 x 450 mm
Weight: 26 kg

Very low frequencies can be reproduced with the ADAM Sub12 Subwoofer. A special long throw 12" bass speaker is tuned in a bass reflex enclosure to a corner frequency of 25Hz and combined with a 200-watt RMS power amplifier to deliver an impressive low end without boominess or compression.

Great LOW bass sound!
The ADAM Sub12 Subwoofer guarantees you´ll hear every remnant of low frequency effects in your 2.1, 5.1 or other surround system. A specially constructed bass speaker with an extended long-throw characteristic means the Sub12 can reproduce frequencies down to 23Hz. And the Sub12´s 200-watt amplifier powers the speaker to its optimum performance.

Connections...!
The Sub12 is easy to integrate into your system. Connect via your choice of RCA or balanced XLR connectors. In order to adapt the Sub12 to different satellite loudspeakers, you can limit the high frequency output of the subwoofer with the variable low pass filter. Plus, you can independently roll off the low frequency output of the satellites using a variable high pass filter. These crossovers are natural and musical thanks to the Sub12´s use of variable frequency 24dB/octave Linkwitz-Riley filters.

less