Home > Digital Mixer Line 6 StageScape M20d
Line 6 StageScape M20d, Digital Mixer
Item number: 10058822
This item is not part of our current product range.
Digital Mixer • Inputs: 12 x Mic/Line Combo, 4 x 1/4-inch line input • Inserts: None • EQ Mono / Stereo channel: 4 Band parametric EQ • AUX send/stereo return: 4 x pre/post • Sub groups: - • Channel volume control: Rotary Pot / Potentiometer • Outputs: Main mix out/balanced: XLR • Effects: 4 x 24 bit digital multi effect • Features: Touchscreen • External Dimensions: n. a. • 20-Channel Digital Mixer with Touchscreen Interface, Auto-sensing Inputs and Outputs, Built-in Processing, USB/SD Card Recording, and Remote Control via Apple iPad • The Line 6 StageScape M20d digital mixing system provides an intuitive way to mix and record live gigs. StageScape M20d was designed to take the guesswork out of live mixing. Plug in all of your sound sources, and the Line 6 StageScape M20d automatically recognizes which are microphones and which are instruments and optimizes your channel strip and effects settings accordingly. Managing signals from an intuitive touchscreen interface, using visual cues to route signals and set up monitor mixes. The StageScape M20d includes a total of 20 inputs, 16 auto-sensing and six auto-sensing outputs, built-in multi-band feedback suppression, remote mixing via iPad, and sound check capability. Line 6 StageScape M20d can 16 channels plus your main mix in high-resolution audio, with or without a computer. DSP processing is easy to use, with intuitive hands-on control. The Line 6 StageScape M20ds large, touchscreen display provides instant access to an array of mixing functions that are usually spread all over a mixer. Need to get a vocal sound fast? Plug in your vocal microphone, select a vocal effects preset, and the StageScape M20d will configure a chain of signal processors specifically for vocals, which you are then able to adjust. Setting up a stage mix is easy. Plug in all your sound sources and speakers, and the StageScape M20d automatically recognizes whats plugged in. Routing signals, adding effects, and setting up monitor mixes is effortless. The effects DSP built into the StageScape M20d replaces racks of signal processors. Included are multi-band feedback suppression on every microphone input, a range of EQ, dynamics, and effects processors for every channel, plus four stereo master effects. StageScape M20s Quick Capture sound check feature records up to 20 seconds of audio to the internal memory from any of the inputs. The recording plays in a loop so you can optimize each sound while the band continues setting up. And you can set up and adjust the StageScape M20d from anywhere in the room with your iPad.
- Digital mixing system with touchscreen interface and intelligent setup Auto-sensing inputs recognize what youre plugging in, and optimizes your channel strip and effects settings Mix from anywhere in the room with your Apple iPad connected via Wi-Fi Multi-band feedback suppression on every output Built-in signal processing eliminates the need for a separate effects racks Connects to Line 6 StageSource-series speakers via Line 6 Link Record up to 16 channels plus your main mix, with or without a computer (SD card or USB drive) 4 Auto-sensing monitor outputs on balanced XLR connectors 2 Auto-sensing main outputs on balanced XLR connectors 2 Digital streaming inputs direct from computer, USB drive or SD card Scene Recall accesses previous setups Quick Capture sound check records up to 20 seconds from all inputs, then loops playback for mixing 12 x digitally controlled auto-sensing XLT / 1/4-inch mic/line preamp inputs 4 x 1/4-inch auto-sensing line inputs 2 x digital USB, 1 x 1/8-inch Aux inputs 2 x XLR Main Outputs 4 x XLR Monitor Outputs 1 x 1/4-inch Headphone Outputs Fully Parametric EQ 2 Busses/Groups 100 Effects Processors: parametric EQs, dynamic EQs, compressors, multi-band compressors, gates, delays, limiters