JBL PRX-615M, Active PA-Speakers

Item number: 10047477
This item is not part of our current product range.
Active PA-Speakers • Subcategory: Fullrange speaker • Design: Multifunctional cabinet • Internal cross over: Yes • Components: 15" LF-1.5" HF-driver Neodymium • directional characteristic: 90° x 50° • Power amp output: 500 + 500 Watt rms • Frequency range: 54 Hz to 18 kHz • Max. SPL ( 1w/1m): 135 dB • Special Features: Digital bi-amp amplifier • Connections: XLR/¼ " combo input; XLR out • Pole flange: Yes • Flyability: Yes • Enclosure: Multiplex; black finish • Dimensions (WxHxD): 660 x 429 x 414 mm • Weight: 19,7 kg • 1,000-watt Active 2-way 15-inch Low-frequency Driver, 1.5-inch High-frequency Driver, and 45Hz-19kHz Frequency Range •
The 1,000-watt 2-way JBL PRX615M active PA loudspeaker features a 15-inch low-frequency driver plus a 1.5-inch high-frequency driver for 45Hz-19kHz frequency response. Though the 2-way 15" is the most recognizable form of portable PA loudspeakers, offering the perfect balance between size and performance, the PRX615M is an exception because it is smaller, powerful, versatile, and more lightweight than most of its peers. The performance and asymmetrical design make the PRX615M a perfect choice for musicians, entertainers, and DJs when portability is key, or when hung by the suspension points, an exceptional light-duty installation speaker. All PRX600 Series speakers were designed to excel in sound reinforcement where challenging audio environments and loud volumes are the norm. For applications requiring full bandwidth sound reproduction, the PRX615M delivers the optimum balance. For live music, recorded music playback, and speech, the user has the option of tailoring the EQ, flat for speech intelligibility, and boost for enhanced bass and crisp highs in recorded music playback. A microphone can be directly connected to the speaker input for quick PA applications. Coupled with a PRX600 sub-woofer (sold separately) the system becomes an efficient, full-range sound system. The PRX615M is comprised of a 380mm (15") 265F Differential Drive dual voice-coil and magnetic gap, neodymium woofer, a 2408H-1 37.5mm (1.5") annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1000W (dual 500W) Crown Class-D power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, crossover functionality, dynamic limiting, and discrete component optimization. All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, lightweight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBLs tour-proven DuraFlex finish. Grilles are made from dent-resistant 16-gauge steel and handles are made from lightweight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14-gauge steel and have been tested with a yield-strength of 1000 pounds each. The amplifier input panel offers XLR or 1/4" jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob.
    15-inch 2-way stage monitor or front of house self-powered speaker system 2 x 500-watt Crown Class D amplifier DSP input section with selectable EQ 45Hz-19kHz full-range frequency response 48Hz-20kHz monitor frequency response 1 x 15-inch JBL 265F Differential Drive dual voice-coil and magnetic gap neodymium woofer 1 x JBL 2408H-1 1.5-inch annular polymer-diaphragm compression driver DuraFlex-covered 18mm plywood enclosure 16-gauge foam-backed steel grille 36mm pole socket Non-skid rubber feet Weight: 43.5 lbs. Max SPL: 135dB full range, 134dB monitor Dimensions: 21.5" x 20.5" x 27.4"