This item is not part of our current product range.
Passive PA-Speakers • Subcategory: Subwoofer • Design: Rectangular enclosure • Components: 18" LF-driver • Power (watts rms): 350 watts • Impedance: 4 ohms • Frequency range: 55 Hz to 300 Hz (+/-3 dB) • SPL ( 1w/1m): 96 dB • Max. SPL ( 1 W/1 m): 127 dB • directional characteristic: Omni-directional • Internal cross over: Yes • Connections: Speakon & ¼ " Jack • Enclosure: Chipboard, black needle felt • Flyability: No • Pole flange: Yes • Special features: None • Dimensions (WxHxD): 508 x 605 x 551 mm • Weight: 32,2 kg • 18-inch Passive Subwoofer System • JBL JRX118S Subwoofer Features:
Type: Passive subwoofer Power Handling: 350-Watts continuous, 1400-Watts peak Sensivity 1-Watt / 1 meter: 96 dB Maximum SPL: 127 dB Nominal Input Impedance: 4 Ohm Frequency Response: 55 Hz – 300 Hz Speaker: 1 x 18-inch cast-aluminum frame subwoofer Dimensions: 508 x 605 x 551 mm Weight: 32,2 kg 35 mm pole mount 3/4-inch MDF Plywood Enclosure 18-gauge steel grille 1/4-inch and Speakon input connectors Dimensions: 20.3"W x 23.5"H x 22"D Weight: 71 lb. The JRX118S passive non-powered subwoofer is rated at 1400 watts peak power capacity and 350 watts continuous. It includes a newly designed JBL 18-inxh woofer with a cast frame and 3-inch voice-coil. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard high-frequency driver protection guards against damage caused by inadvertent overpowering of the woofer. The passive JRX 118S subwoofer can be used to supplement any fullrange-loudspeaker. It will surly shake the ground with its massive JBL 18" woofer with a cast frame and 3" voice-coil. The high efficiency and a impedance of 4 ohms helps while optimising the amplifiers connection. The recessed speaker pole flange enables the use of elevated satellites. The active crossover starts at 100 Hz.
Alternative products from our current product range: