Electro Voice Sx300E

Electro Voice Sx300E, Passive PA-Speakers

Item number: 2407138
This item is not part of our current product range.
Passive PA-Speakers • Subcategory: Fullrange • Design: Multifunctional cabinet • Components: 12" LF-/1" HF-driver • Power (watts rms): 300 watts • Impedance: 8 ohms • Frequency range: 48 Hz to 280 Hz (-10 dB) • SPL ( 1w/1m): 99 dB • Max. SPL ( 1 W/1 m): 131 dB • directional characteristic: 65° x 65° • Internal cross over: Yes • Connections: Neutrik Speakon • Enclosure: Black PVC plastic • Flyability: Yes • Pole flange: Yes • Special features: None • Dimensions (WxHxD): 430 x 590 x 310 mm • Weight: 17,7 kg • Features:
    Type: 2-way fullrange Output power : 300 watts Max. SPL (1W / 1 m): 99 dB Nominal impedance : 8 ohms Frequency range: 50 Hz – 20 kHz (-10 dB) Components: 12-inch woofer, constant-directivity 65° x 65° high-frequency horn Dimensions: 586 x 429 x 312 mm Weight: 14,5 kg Lightweight, durable polymer enclosure with integral handles and stand mount The introduction of the Electro-Voice Sx200 in the year 1994 shook the whole of the audio community. It was the first lightweight, compact loudspeaker, whose capacity output could match that of considerably larger and more expensive systems. Since then you can see many Sx200 on stages, clubs, heatres, churches and even stadiums worldwide. No comparable system comes close to the flexible Sx 200. Till this very day ! The Electro-Voice ® Sx300 is a 300-watt, 12-inch two-way, high-efficiency, constant-directivity compact speaker system with Ring-Mode Decoupling (RMDTM). Through the extensive use of computer-aided design and modelling, Electro-Voice engineers have developed a state-of-the-art professional loudspeaker system. With 300 watts continuousak power handling it delivers over 125 dB continuous, 131 dB peaks (1 w / 1 m) at full power. 65° x 65° Constant-directivity horn allows use vertically or horizontally with identical coverage. Delivers better pattern control and projection than typical 90° horns Proven, reliable EV components including DL12BFH cast-frame 12-inch woofer and DH2010a pure titanium compression driver. Ring-Mode Decoupling (RMD) delivers unequalled vocals and pure, accurate instruments and mids. The horn’s unique, Warpath TM throat geometry helps direct driver output to the corners of the room, points of coverage not described in the usual specifications of horizontal and vertical coverage angles, and parts of the audience that typically do not receive the strongest coverage. One of the many other features of the Sx300 is the cabinet. Constructed of high-impact polypropylene structural foam, it provides a stiff and extremely durable enclosure. Moulded into the cabinet are an integral carrying handle and a stand socket for mounting on 1-3/8-inch stands such as the Electro-Voice 100BK. Rubber feet that are attached to the bottom of the cabinet and mating sockets that are moulded into the top provide a means of stacking systems. The trapezoidal-shaped cabinet, in combination with the uniform, 65° x 65° directivity characteristics, make the Sx300 ideal for use alone or in arrays. MP-rating: Embedded in the same enclosure and with the same features as the SX 100+ (one of the most successful 12“/1“ loudspeaker systems worldwide) the SX 300 has the stronger EV DL 12 BFH- woofer, so that the combination is capable to handling loads of up to 300 watts/rms. This is a reference system when it comes to voice presentation. 4 Sars Legend: 1 Star – still room for improvement! 2 Stars – overall impression satisfactory! 3 Stars – good price/performance value! 4 Stars – very recommendable! 5 Stars – highly recommendable! 6 Stars – unbeatable top product!
Electro Voice